Jeep Jk Axle Ratio Chart - Raquel E. Miller

Jeep Jk Axle Ratio Chart – What gear ratio should i choose for my jeep wrangler jk or jk unlimited? The dvd that came with the jk has a table that shows the auto tranny comes with a 3.73, and only the 6 speed manual has the 3.21 ratio as standard. A somewhat normally geared jeep running a 3.83 gear and a 2.72 low gear ratio, along with a standard axle gear ratio of 3.73 is multiplying 3.83 times 2.72 and 3.73 to arrive at 39. For standard 30 spline axle shafts our rd117 will be used.

Axle Help, 4.88, Dana 44, Etc. Jeep Wrangler Forum

Jeep Jk Axle Ratio Chart

Jeep gear ratio a frequently asked question we hear is what is the proper gear ratio for my tire size?. On rubicon) overall top gear: Watch on roper gear ratio tire size:

(.12 X 38 = 4.56) The Below Table Can Be Used To Get A Rough Idea On Gear Ratios.

Some of the possible ratios include 3.07, 3.55, 3.73, and 4.10. The chart is based on rpm levels at 65 mph (105 kph) and a drive train running at a 1:1 gearing ratio, meaning the transmission and transfer case are passing power straight through at a one to one ratio. Chart for determining gear ratios for your jeep.

This Is A Low Ratio.

Towing package axle ratio 3.55. A basic method to calculate is to mutiply.12 by your tire diameter. If i choose a 5.13 ratio that means the pinion is turning 5.13 times for every 1 time your ring gear turns.

The Stock Gear Ratio Tends To Vary Depending On The Year And Package Your Jeep Has.

(or you can think of it as your driveshaft turns 5.13 times for. For custom 35 spline shafts. All gear ratios used in the jk will be of a ‘thick’ design and the 3.73↑ case.